Left Wing Rib Dimpling

Time: 2 Hours

Today I tackled deburring and dimpling all the holes in the left wing ribs as I did for the right wing. No pictures of that but I did create a time lapse video of that work here. I also used my deburring bit to touch up the dimples on the rear spar where I had to dimple way back in the build process as per the plans. You just need to remove a very little bit of material to help the skins dimples sit flush.

20140320-151836.jpgmy cat Harley found his new favorite spot to watch me work.

20140320-151932.jpgNext up tomorrow will countersink all the rivet holes in both main spar flanges.

Print Friendly, PDF & Email