Bending the Trailing Edges

Posted on June 6, 2013 by Michael — No Comments ↓

Time: 1 Hour

Today started off with bending the trailing edges of the elevators. This kind of step always makes me take a few deep breaths. It can be a make or break for a part to look nice when finished! Here is the first one done, the right side.

And the left side.

Leave a Reply Cancel reply

Total Time – 1938 Hours

Empennage Total – 218 Hours
Horizontal Stabilizer – 83 Hours
Elevators – 53 Hours
Vertical Stabilizer – 22 Hours
Rudder – 37 Hours
Fiberglass – 23 Hours

Wings Total – 536 Hours
Wing Structure – 216 Hours
Fuel Tanks – 135 Hours
Ailerons – 53 Hours
Flaps – 42 Hours
Wiring – 11 Hours
Fiberglass – 56 Hours
General – 23 Hours

Fuselage Total – 1184 Hours
Canopy – 124 Hours
Engine: 115 Hours
Cowl – 64 Hours
Firewall – 62 Hours
Firewall Forward – 16 Hours
Forward Section – 285 Hours
Center Section – 57 Hours
Seat Substructure – 27 Hours
Mid Fuselage – 131 Hours
Aft Fuselage – 190 Hours
Wiring – 113 Hours