Time: 2 Hours
I did some touch up sanding along the fairing and cleaned up all the dust so that I could prime the surface to fill the pinholes with UV smooth prime. I ended up with two coats of UV prime sanding in between the coats. 
After sanding I taped of the entire area and sprayed three coats of filler primer. 
After the primer dried I used a flashlight at an angle to see the few larger pinholes that didn’t get filled. I used some Super-Fill to get those and will sand them tomorrow and reprime. 
I’m happy with the work and will let the painter finish up the detail work.
