Time: 3 Hours

I removed the canopy structure and flipped it over into the cradle. I have a slight “squeak” when the aft section of skirt moves. It sounds like it’s the fiberglass skirt rubbing or moving ever so slightly on the canopy. So I decided that I would fill the gap between the skirt/canopy and the canopy/frame with pro-seal. I taped it all off to protect the areas that I didn’t want to get a mess on. I also taped of the inside of the forward baggage area were the top skin meets the firewall for sealing that gap while I was gonna have the pro-seal out.

I bought the premeasured type from Aircraft Spruce that fits in the special gun.

After the required mixing I went to it making sure I had all the required items out for clean up including the MEK and tons of rags…this stuff is messy!

With a quick pull of the tape while it was still wet I had nice clean lines. Hopefully the squeak will be gone once this cures in a few days.

Print Friendly, PDF & Email

Leave a Reply

Your email address will not be published. Required fields are marked *